Barca a vela : imbarcazione a chiglia da regata TEMPEST (classe mondiale ISAF)
TEMPEST
Bootswerft Mader
- 6.8m 
22' 4"ft
• Hull, deck and double bottom are built with polyester resin in vacuum-sandwich-construction
• forebody and double bottom seperated bulkheads, three separate buoyancy tanks, therefore an absolutle unsinkable boat
• self-bailing cockpit
• in the double bottom there is an integrated channel for the control lines with cover
• spi chute and tube in the forebody under
the side deck on starboard side
• big aft storage with hatch
• keel covered with laminate
• rudder blade, made of GRP with foam sandwichcore,
and stainless steel stock
• fiberglass tiller
EQUIPMENT
• mast, boom and spi pole by PROCTOR
• Traveller track with ball bearing slide
• Automatic traveller track by HARKEN
• jib hauling points on a track with stopper for fore
and aft adjustment
• control lines for cunningham mainsail and jib halyard fore at the bridge deck
• vang and outhaul at the trailing edge of the bridge deck
• adjustment for topping lift and spipole down in the
middle of the bridge deck
• adjustment for forestay 1:12 central, tackle in the channel of the cockpit
• compass by Suunto with support fore in the cockpit
• revolving mainsheet block
• opener for the bailers aft in the cockpit with elastic strap
• bag for the anchor fore in the cockpit
• brace board for the helmsman
• barber hauler fore in the cockpit
• small bags for tools in the stowage space
• all blocks ball bearing
• Dyneema ropes by LIROS
22' 4"ft
• Hull, deck and double bottom are built with polyester resin in vacuum-sandwich-construction
• forebody and double bottom seperated bulkheads, three separate buoyancy tanks, therefore an absolutle unsinkable boat
• self-bailing cockpit
• in the double bottom there is an integrated channel for the control lines with cover
• spi chute and tube in the forebody under
the side deck on starboard side
• big aft storage with hatch
• keel covered with laminate
• rudder blade, made of GRP with foam sandwichcore,
and stainless steel stock
• fiberglass tiller
EQUIPMENT
• mast, boom and spi pole by PROCTOR
• Traveller track with ball bearing slide
• Automatic traveller track by HARKEN
• jib hauling points on a track with stopper for fore
and aft adjustment
• control lines for cunningham mainsail and jib halyard fore at the bridge deck
• vang and outhaul at the trailing edge of the bridge deck
• adjustment for topping lift and spipole down in the
middle of the bridge deck
• adjustment for forestay 1:12 central, tackle in the channel of the cockpit
• compass by Suunto with support fore in the cockpit
• revolving mainsheet block
• opener for the bailers aft in the cockpit with elastic strap
• bag for the anchor fore in the cockpit
• brace board for the helmsman
• barber hauler fore in the cockpit
• small bags for tools in the stowage space
• all blocks ball bearing
• Dyneema ropes by LIROS
